Lighting & Fountain Guides

Waterproof Outdoor LED Lights: IP65, IP66, IP67 and IP68 Explained

Phối cảnh ma trận LED Pixel với các điểm sáng riêng lẻ tạo họa tiết xanh, tím và vàng trên mặt dựng

Short answer: a good outdoor LED fixture is not simply one with a high IP rating. Choose the right IP rating for the location (IP65 under cover, IP66 where exposed to direct rain, IP67 for in-ground fixtures, IP68 for underwater), and pay equal attention to connectors, housing, screws and how the fixture is wired on site. Most outdoor fixtures fail because water gets in through connectors, not through the body.

What do IP65, IP66, IP67 and IP68 mean?

IP is the protection rating of electrical equipment against dust and water. The first digit is dust protection, the second is water protection. For outdoor fixtures the first digit is usually 6, meaning fully dust-tight. The difference lies in the second digit:

RatingWater protectionWhere to use
IP65Water jets from any directionCovered facades, verandas, lobbies
IP66Powerful water jets, heavy driving rainFacades exposed to rain, high-rise, coastal buildings
IP67Temporary immersion, about 1 m for 30 minutesIn-ground fixtures, gardens that may flood in heavy rain
IP68Continuous immersion, depth as declared by the manufacturerUnderwater lights for pools, fountains, musical fountains

Is IP68 always better than IP66?

Not necessarily. IP67 and IP68 are tested by immersion, while IP65 and IP66 are tested with water jets. These are different tests. A fixture rated IP68 does not automatically withstand powerful jets like storm rain hitting a facade. For high-rise or coastal facades, choose fixtures carrying both ratings, for example IP66 and IP67, to be sure they handle both driving rain and standing water.

Why do IP67 fixtures still take in water?

Many building owners face this after one or two rainy seasons. The cause is usually not the fixture body:

  • Connectors and site wiring: the fixture is IP67 but the joint on site is only taped or uses ordinary connectors. Water follows the cable into the fixture.
  • Fixtures breathing in moisture: fixtures heat up by day and cool at night, the air inside contracts and draws in humid air through tiny gaps. Over time water condenses inside the lens. Good fixtures have a breather valve that equalises pressure without letting water in.
  • Ageing seals: strong sun and heat harden rubber seals, which lose their seal after a few years.
  • Wrong orientation: cable entry facing upwards lets water run down the cable into the fixture, or in-ground fixtures have no gravel drainage beneath them.
  • Corrosion near the sea: salt air rusts screws, gaps widen and water gets in.

Which outdoor LED fixtures are good? Six things to check

  1. The right IP rating for the location: per the table above, no lower, and no need to pay for more than required.
  2. Factory-moulded waterproof connectors: ask whether waterproof connectors are supplied and how site connections are made.
  3. Housing: die-cast aluminium with weatherproof coating, or 316 stainless for coastal and underwater use. Lenses of tempered glass or UV-stabilised polycarbonate so they do not yellow.
  4. Screws and brackets: 316 stainless steel for coastal sites. 201 stainless is cheaper but rusts quickly.
  5. Voltage: 24 V or 48 V fixtures are safer than 230 V where people can touch them or near water. Underwater lights should run at low voltage. See why use 48 V LED.
  6. Power supply location: supplies belong in a ventilated technical cabinet, not exposed to rain and sun. Failed supplies are the second most common fault after connectors.

Waterproof outdoor LED strip: which type?

  • Extruded silicone LED strip: flexible, durable in sun, well waterproofed, suitable for facade outlines and curves.
  • Epoxy-coated LED strip: cheap, but the epoxy yellows and cracks in strong sun. Use only under cover.
  • Long 230 V strip reels: cheap and easy to install, but less durable and less safe. Avoid where people can touch them or near water.

For building facades, outdoor aluminium LED bars are usually more durable and more even than strip. See fixture types for building facades.

Notes for Da Nang and Central Vietnam

Central Vietnam has a long rainy season, strong storms and many buildings right on the coast. In Da Nang, Hoi An and Quy Nhon, choose facade fixtures rated IP66 or higher with 316 stainless screws, and check connectors before the storm season. In Hue, buildings are further from the sea but humidity is high, so prefer fixtures with breather valves. If fixtures already have water inside or flicker, see fixing dark or flickering facade LEDs.

Frequently asked questions

Can IP65 fixtures be used in the rain?

Yes, in normal rain. But where exposed to strong driving rain, on high-rise facades or near the sea, choose IP66 or higher for long life.

There is condensation inside the lens. Is that a problem?

It shows moisture has got inside. Left for long, the LED board and driver will corrode. Check the seal and connectors, and replace with fixtures that have a breather valve if it keeps happening.

What do underwater lights for pools and fountains need?

IP68, a 316 stainless housing, low voltage such as 12 V or 24 V, and a control panel with residual current protection. See fountains with LED lighting.

Need advice on fixtures for a specific project? Send photos of the installation location via Zalo +84 935 004 188 and ARTTEC will suggest suitable fixtures and waterproof ratings for your project in Da Nang, Hoi An, Hue or Quy Nhon.

Leave a Reply

Your email address will not be published. Required fields are marked *