Lighting & Fountain Guides

Facade Lighting for Office Buildings and Headquarters

Phối cảnh ý tưởng Facade Dynamic: Chiếu sáng RGBW theo tầng mặt dựng khách sạn

A well-lit office building is a company’s biggest billboard at night. Unlike hotels or showrooms, office buildings often have large glass facades, are empty after hours and need low running costs. This article covers what to consider when lighting the facade of an office or headquarters.

What office facade lighting should achieve

  • Brand identity: the building and logo are easy to recognise from the main road.
  • A professional image: clean, purposeful light rather than gaudy effects.
  • Low running costs: low energy use and few repairs.

Glass: the biggest challenge

Glass barely holds light, and floodlights aimed at it only create glare. For glass-heavy buildings it is better to:

  • Light the frames, mullions, louvres and floor bands rather than the glass itself.
  • Use linear LED contours along corners and roof edges to redraw the building’s shape.
  • Make use of light from inside the lobby and top floor to give the building depth.
Facade Lite concept with LED lighting highlighting architectural lines
Concept rendering: static light highlighting architectural lines.

Highlighting the logo and entrance

The rooftop logo and main lobby are the first things people see. The logo should have its own brightness so it does not disappear into the facade. The lobby and entrance should be well lit and welcoming for evening visitors.

Scenes by time and occasion

The control system can switch scenes automatically by time and calendar:

  • Weekdays: soft warm white, switched off or dimmed after a set time.
  • Holidays, Tet and company events: with RGBW fixtures, switch to brand colours or seasonal colours.
  • Late night: keep only the logo and security lighting to save energy.

Choosing the right level of investment

ARTTEC groups facade lighting into three levels for easy comparison: Facade Lite, static light highlighting lines; Facade Dynamic, RGBW colour changes by zone; and Facade Signature, LED pixels controlled point by point. Most office buildings suit Lite or Dynamic. See the indicative budget for each level.

Planning maintenance access

Fixtures on high floors can only be reached by gondola, lift or rope access. Design should place fixtures where they can be reached from balconies, plant floors or the existing gondola route, and use long-life equipment to reduce trips at height.

Frequently asked questions

Can lighting be installed on an occupied building?

Yes. Work is scheduled to minimise disruption to working hours, after surveying mounting positions, power supply and cable routes.

Is a permit needed for facade lighting?

It depends on the locality and building type. Check first with the building management and the local urban authority, especially for LED screens and advertising.

See our facade lighting design and installation service. Send a photo of your building via Zalo +84 935 004 188 for advice.

Leave a Reply

Your email address will not be published. Required fields are marked *