Published product information
| Published maximum flow | 768 m³/h |
|---|---|
| Filtration range | 5–400 microns |
| Filter size | 4 inches |
| Filters per module | 4–10 |
| Inlet / outlet | 8–12 inches |
| Filter area | 11,936–29,840 cm² |
| Valve reference | 3 inches |
Filtration and backwashing
The HELIX device creates a centrifugal helical flow that moves particles away from the discs. Water passes through the disc stack from outside to inside. During backwashing, reverse flow releases the discs and carries retained particles to the drain; the discs then compress again for filtration. Cleaning can be controlled by differential pressure, a schedule or a manual command, depending on the configuration.
Modules are supplied assembled. The existing reference describes differential-pressure cleaning and advises that the pressure difference should not exceed 0.5 bar; confirm controller settings for the selected equipment.
Discuss your project
Send your layout, site photographs and requirements to info@arttec.com.vn or call +84 935 004 188. ARTTEC: 227 29 Thang 3 Street, Hoa Xuan Ward, Da Nang, Vietnam.


Reviews
There are no reviews yet.